What is Reinforcing Mesh?

What is Reinforcing Mesh?

High Strength Square Reinforcing Mesh is also known as welded steel mesh, steel Welded Mesh, steel welded mesh, steel welded mesh, steel mesh and so on. It is a mesh in which longitudinal steel bars and transverse steel bars are arranged at a certain interval and are at right angles to each other, and all intersections are welded together.The surface of the High Strength Square Reinforcing Mesh has longitudinal ribs and transverse ribs, usually with two longitudinal ribs and transverse ribs evenly distributed along the length. High Strength Square Reinforcing Mesh is a small section steel, mainly used for the skeleton of reinforced concrete building components. 

In use, certain mechanical strength, bending deformation performance and process welding performance are required. The raw material billet for the production of rebar is carbon structural steel or low alloy structural steel that has been quenched and smelted, and the finished steel bar is delivered in a hot-rolled, normalized or hot-rolled state.
Advantages of Stainless Steel Reinforcing Mesh:
1. Guarantee the quality of the project
2. Improve earthquake resistance and crack resistance
3. Save steel consumption
4. Speed up construction progress

The use of Hot Sales Reinforcing Mesh can make engineering construction quicker. As long as the Hot Sales Reinforcing Mesh is laid according to the requirements, the concrete can be poured, which saves the on-site cutting of the steel bars, placing them one by one and helping to tie them. Hot Sales Reinforcing Mesh has good comprehensive economic benefits. The design strength of welded mesh reinforcement is 50% (smooth steel welded mesh) to 70% (welded mesh for guardrail mesh) higher than that of Class I reinforcement, and Stainless Steel Reinforcing Mesh can still save reinforcement after considering some structural requirements. About 30%, plus the processing cost of scattered steel bars with a diameter below 12mm is about 10% to 15% of the material cost. Considering comprehensively (compared with Class I steel bars), steel mesh can reduce the cost of steel bar engineering by about 10%.